WRAPTOR 1650 VPT 2700 is a turntable pallet wrapping machine with motorised pre-stretch. The pallet is placed on the Ø1650 mm turntable from the front with a forklift; the table turns while the film carriage travels up and down, wrapping loads up to 2,700 mm high, 1300 × 1100 mm and 2,000 kg.
Stretch film wrapping protects goods from moisture, mechanical damage and atmospheric influences during storage and transport, keeps the load stable and keeps the product presentable. The motorised pre-stretch carriage stretches the film from 0 to 250% before it reaches the load, so each pallet uses less film than with a mechanical brake.
Key features
- Ø1650 mm turntable, 2–10 rpm, adjustable speed
- Motorised pre-stretch, 0–250%
- Loads up to 2,700 mm high, 1300 × 1100 mm, 2,000 kg
- Front forklift loading
- Single-phase 220 V, 50/60 Hz (110 V optional), 1 kW
- Film 500 mm wide, rolls up to Ø250 mm and 16 kg on 76 mm cores
Technical specifications
| Table diameter | Ø1650 mm |
| Table turning speed | 2–10 rpm |
| Forklift loading | Front |
| Electric supply | 220 V, 50/60 Hz, single phase (110 V optional) |
| Total power | 1 kW |
| Tensioning system | Motorised pre-stretching |
| Tensioning rate | 0–250% |
| Speed adjustment | Available |
| Film width | 500 mm |
| Max. film roll diameter | Ø250 mm |
| Max. film roll weight | 16 kg |
| Film roll inner diameter | Ø76 mm |
| Max. load height | 2,700 mm |
| Max. load dimensions (W × D) | 1300 × 1100 mm |
| Loading capacity | 2,000 kg |
| Machine dimensions (H × W × D) | 2930 × 1650 × 2660 mm |
Values from the Bronse catalogue 2026. Ask us for the configuration that matches your film and rolls.
Where it is used
- End of production lines with standard pallets in high numbers
- Warehouses and distribution centres
- Export shipments that need a stable, protected load
How the WRAPTOR 1650 VPT 2700 wraps a pallet
- The pallet is placed on the Ø1650 mm turntable from the front with a forklift.
- The film end is fixed to the pallet and the speed and tension are set on the control panel.
- The turntable rotates at 2–10 rpm while the film carriage travels up and down the mast, up to 2,700 mm load height.
- The motorised pre-stretch unit stretches the film by up to 250% before it reaches the load.
- At the end of the cycle the film is cut and the wrapped pallet is taken away.
What pre-stretch means for film use
Pre-stretching elongates the film between two rollers before it reaches the load. At a tensioning rate of 250%, 1 metre of film from the roll becomes up to 3.5 metres on the pallet; at 100%, 2 metres. Higher pre-stretch means fewer rolls per pallet, but the right rate depends on the film and the load, so it is set on the machine for each product.
Film rolls for the WRAPTOR 1650 VPT 2700
The machine takes film rolls 500 mm wide, up to Ø250 mm and 16 kg, on Ø76 mm cores – the standard machine-roll format. Film producers can make exactly this format on Bronse rewinders such as NORMA 250.
Choosing between WRAPTOR models
Both models share the same mast, film carriage and 2,700 mm load height. WRAPTOR 1650 VPT 2700 takes loads up to 1300 × 1100 mm and 2,000 kg. For smaller pallets, WRAPTOR 1500 VPT 2700 covers loads up to 1200 × 1000 mm and 1,500 kg. If loads are very large, irregular or spread around the site, a mobile ROBOWRAP robot may suit better.
Preparing your site
- Electricity: 220 V, 50/60 Hz single phase (110 V optional), 1 kW total power – no three-phase supply needed.
- Floor space: machine dimensions 2930 × 1650 × 2660 (H × W × D) mm, plus forklift access at the front.
- A level floor so the turntable runs evenly.
Frequently asked questions
What is the difference between VPT and MB?
VPT models stretch the film with a motorised pre-stretch carriage (0–250%). MB models use a mechanical brake (0–100%). Pre-stretch means less film per pallet.
Which film does the WRAPTOR use?
Machine rolls 500 mm wide, up to Ø250 mm and 16 kg, on 76 mm cores.
How much film does pre-stretch save?
At 250% pre-stretch, 1 m of film becomes up to 3.5 m on the load. Real savings depend on your film and how tightly the load must be held.
Which film rolls does it take?
Rolls 500 mm wide, up to Ø250 mm and 16 kg, on Ø76 mm cores.
Related machines
- WRAPTOR 1500 VPT 2700 – Ø1500 mm table, loads up to 1,500 kg
- ROBOWRAP 2700 VPT – mobile pallet wrapping robot
Get a quote for the WRAPTOR 1650 VPT 2700
Tell us your jumbo roll width, film thickness and the finished rolls you sell. We will reply with a configuration and a price.
