Stretch film leaves the extrusion line on large jumbo rolls that are too heavy and too wide to wrap with. A rewinder unwinds the jumbo and winds the film onto smaller cores at a set length or weight; a slitter rewinder also cuts it into narrower widths on the way. That is how one jumbo roll becomes dozens of hand rolls, machine rolls or cling film rolls ready to sell.
Where jumbo rolls come from
On a cast or blown film line, the film is produced in wide webs and wound into jumbo (mother) rolls, usually on 76 mm cores. Producers wind jumbos because it keeps the extrusion line running without stopping for every small roll. The rolls the market buys – light hand rolls for manual wrapping, heavier machine rolls for pallet wrappers, narrow rolls for bundling – are made afterwards, by converting.
Rewinding and slitting: two basic operations
- Rewinding transfers the film from the jumbo onto a smaller core, at full width, and stops at the set roll length or weight.
- Slitting cuts the web into narrower strips while it is being rewound, so several rolls are wound side by side.
Many machines do both: a slitter rewinder can run with the knives open for full-width rolls, or slit one jumbo into, for example, two 250 mm rolls or ten 50 mm rolls.
What happens inside the machine
- The jumbo roll is mounted on the unwind shaft.
- The film runs over guide rollers that keep tension steady, so the film is not over-stretched and keeps its cling.
- If slitting is selected, knives cut the web into the chosen widths.
- The film is wound onto the finished-roll cores.
- At the set length the film is cut, the cores change and the finished rolls come off – on the NORMA 250 and ULTIMA 250, a 150 m roll takes 10.1 seconds.
- Rolls go to labelling and packing while the next ones wind.
Machines for special roll types
The same principle is adapted for products that need more than a plain transfer:
| Machine | What it does | Typical use |
|---|---|---|
| NORMA 250 | Rewinds jumbos into hand, machine and cling film rolls at up to 1,200 m/min (1,500 m/min with double servo) | Producers and distributors with high volumes |
| ULTIMA 250 | Same rewinding speed, plus slitting from 50 mm × 10 to 250 mm × 2 rolls | Distributors who stock one or two jumbo widths |
| STELLA 250 | Semi-automatic slitter rewinder | Smaller volumes and first investments |
| UNIVERSA 250 | Rewinds standard or pre-stretched film | Pre-stretch hand rolls that the user does not need to stretch |
| ICONA 250 | Slits and rewinds coreless rolls | Rolls without a cardboard core |
| OPTIMA 30 | Turret rewinder for food-grade cling film | Cling film converters |
NORMA 250 and ULTIMA 250 can also be fitted with an edge-folding option, which folds both edges of the film before winding so the roll has reinforced edges.
Who does the converting
- Stretch film producers rewind their own jumbos next to the extrusion line and sell finished rolls.
- Distributors buy jumbo rolls and rewind the sizes their customers order. Slitting lets them keep one or two jumbo widths in stock and still accept orders for widths they do not keep.
- Converters supply cling film rolls for food packaging and catering from the same kind of line.
What decides the right machine
- Jumbo size: NORMA 250 and ULTIMA 250 take jumbos 300–700 mm wide, up to Ø480 mm and 70 kg.
- Roll formats: finished rolls up to Ø250 mm on 25, 38, 50 or 76 mm cores.
- Film: thickness from 5 to 50 micron.
- Output: rolls per shift and number of shifts.
- Special products: pre-stretch, coreless, cling film or reinforced edges.
Frequently asked questions
What is the difference between a rewinder and a slitter rewinder?
A rewinder winds the film at full width onto smaller cores; a slitter rewinder also cuts it into narrower rolls.
Can one machine make both hand rolls and machine rolls?
Yes. NORMA 250 and ULTIMA 250 wind hand rolls, machine rolls and cling film rolls on different cores.
Do I need a separate machine for pre-stretch film?
Pre-stretch hand rolls are made on a rewinder built for it, such as the UNIVERSA 250, which can also rewind standard film.
How fast is stretch film rewinding?
NORMA 250 and ULTIMA 250 run at up to 1,200 m/min, or 1,500 m/min with the double servo motor option. Actual speed depends on the film.
Tell us your jumbo size, film and the rolls you want to produce – we will recommend the right machine. Contact us for a quote.
